Description
Pan Tilt Platform Kit for Raspberry Pi Cameras:
The ArduCam Pan Tilt Platform for Raspberry Pi Cameras (B0227) includes 2-DOF Bracket Kit with Digital Servos and PTZ Control Board. This new arrival can move your camera in two dimensions with 180 degrees horizontal and 145 degrees vertical movements. The vertical range of the Upgraded Camera Pan Tilt Platform (B0283) has expanded to 180 degrees, and has a custom board that fits within the base. The PTZ camera controller board outputs the PWM signals to drive the servo motors directly. So, this platform can be used to control your camera to monitor places that should be covered by multiple ones commonly in the surveillance system.
Specifications
– Digital Servo
- Torque: 0.6 kg/cm at 3.6V, 0.8 kg/cm at 4.8V
- Operating Speed: 0.13sec/60° at 3.6V, 0.09sec/60° at 4.8V
- Operating Voltage: 3.6v～4.8v
- Operating Current: ＜350mA
- Dead Band: 3 usec
- Dimension: 20mm x 8.75mm x 22mm
– PTZ Control Board
- PWM Driver: PCA9685
- PWM resolution: 12-bit
- Communication interface: I2C
- Operating voltage: 3.3V/5V
- Dimension: 25mm x 61mm
Packing List
- 2x Digital servos
- 1x set epoxy bracket pieces with screws
- 1x PWM control board
- 4x Female to female jumper wires (The wire has no fixed color)
- 2x Male to female jumper wires (The wire has no fixed color) – not provided/needed for Upgraded Kit
Additional Resources
- Pan Tilt Platform Kit for Raspberry Pi Cameras Quick Start Guide
- YouTube Video – showcases installation and some simple use cases
Reviews
There are no reviews yet.