ArduCAM LF Shield Rev C+ w/ 2.0 MP Camera Module


11 in stock (can be backordered)


ArduCAM LF Shield Rev C+ w/ 2.0 MP Camera Module:

The ArduCAM LF Shield Rev C+ is a universal camera control board for Arduino. It hides the complex nature of the camera and provides the easy to use camera control interface as well as the ready to use software source code library and demo code. The ArduCAM supports variety camera modules from 0.3MP to 5MP with different format like RAW, RGB, YUV, JPEG and can be well mated with standard Arduino boards. This version includes a 3.2″ TFT LCD mounted to the back of the PCB.  The ArduCAM F Shield Rev C+ version does not have an LCD mounted to the back of the PCB.

ArduCAM Rev.C+ is the latest revision of ArduCAM shields, it offers the improved performance and enhanced functions than the previous revisions. It can capture maximum 5MP JPEG images, which makes it to be the ideal solution for IoT applications.

The ArduCAM is designed for Arduino but not limited to Arduino, it can be used in any platforms like Arduino, Raspberry Pi, Maple, Chipkit, Beaglebone black, as long as they have the SPI and I2C interface. User can port the current Arduino library to other platforms with less effort.

  • Support 0.3MP~5MP camera modules, see Table 1
  • 3.2 inch TFT LCD with touch screen
  • Build in SD/TF card socket
  • Support JPEG compression mode, single and multiple shoot mode, one time capture multiple read operation, burst read operation, low power mode and etc.
  • Support many microcontroller platforms
  • Open source code library provided, please visit Arducam github
  • All ArduCAM’s IO ports are 5V/3.3V tolerant
  • Well mated with standard Arduino boards

Table 1 – ArduCAM Shield V2 Supported Camera Modules

Resolution Sensor Vendor Camera Module Manufacturer
0.3MP Omnivision OV7660 / OV7670 / OV7675 / OV7725 ArduCAM
0.3MP Aptina MT9V111 ArduCAM
1.3MP Aptina MT9M112 / MT9M001 ArduCAM
2MP Omnivision OV2640 ArduCAM
2MP Aptina MT9D111 / MT9D112 ArduCAM
3MP Omnivision OV3640 ArduCAM
3MP Aptina MT9T112 ArduCAM
5MP Omnivision OV5640 / OV5642 ArduCAM
Spec ArduCAM Shield Rev C+
Resolution 0.3MP ~ 5MP
3.2″ TFT LCD Included
TF/SD card Supported
Frame Buffer 512 Kb
SPI Speed 8MHz
Power 50mA@5V
Not including camera module
Size 99x59mm
Weight 50g
Temperature -10°C ~ +55°C

  • IoT cameras
  • Robot cameras
  • Wildlife cameras
  • Scientific cameras
  • Machine vision
  • Other battery-powered products
  • Can be used with any MCU, ESP8266, Raspberry Pi, ARM, DSP, FPGA platforms
Package Includes:
  • 1x Arducam LF Shield Rev C+ camera module shield
  • 1x OV2640 camera module
  • Note: Arduino UNO Board is not included in the package

Additional information

Weight 2.35 oz
Dimensions 4.5 × 4.0 × 1.0 in


There are no reviews yet.

Be the first to review “ArduCAM LF Shield Rev C+ w/ 2.0 MP Camera Module”

Your email address will not be published. Required fields are marked *