Description
Overview
This Arducam quadrascopic camera bundle incorporates four 1MP OV9782 global shutter cameras, and the cutting-edge MIPI stereo camera breakthrough from Arducam – The Arducam Camarray HAT. As the upgraded version of Arducam Synched Stereo Camera HAT, the Camarray further pushes the multi-camera limits and doubles the interfacing capabilities to allow 4 synchronized MIPI camera modules to be interfaced to a single MIPI CSI-2 slot on prevailing single-board computers like Raspberry Pi. Also, as the Camarray HAT releases, Arducam starts to support a variable baseline for stereo camera applications with some modified Arducam camera modules, such as those OV9782 ones included in this bundle. Since no shared camera board or clock-sharing soldering is required for the image sensors, you can kick off your prototyping for stereo camera applications and then decide the optimal baseline. This camera can only get four images. Arducam also accepts subsequent customizations for your stereo camera applications.
Features
- Complete Synchronization: The frames of four cameras of this bundle are synchronized at the hardware level, extra synchronization scheme by time stamping or so does not need to be considered.
- Color Global Shutter: Shoot high-speed moving objects in crisp sharp images. Avoid the rolling artifacts to get a much more accurate complete picture than the rolling shutter Pi cameras.
- Variable Baseline Extension: Compared to the fixed stereo camera module, this stereo camera bundle has higher flexibility. The separated cameras can be used with a variable baseline device and controlled through the computer control system to achieve rapid and dynamic interactive adjustment of the moving parts for multi-degree-of-freedom stereo quadrascopic vision.
- Support Changing Frame Rate: You can change the frame rate from 5fps to 45fps. If the set frame rate exceeds the maximum value, it will work according to the maximum value. The same goes for the minimum value.
Applications
- Head, and eye-tracking
- Gesture detection
- Motion detection
- 3D reconstruction
- Depth-related vision applications
Specifications
| Support Platform | Raspberry Pi and Jetson Nano |
| Output/CSI-2 Speed | x1 CSI-2 2-lane Output Port/1.0 Gbps/Lane |
| Output Formats | RAW8/RAW10 |
| ISP Support | Supported on Raspberry Pi, not supported on Nvidia Jetson |
| External Triggle | Support |
| Aggregate mode | Full Spelling Combine |
| Frame Rates(On Raspberry Pi) | RAW8: 5120×800@45fps, 5120×720@50fps, 2560×400@150fps RAW10: 5120×800@35fps, 5120×720@40fps |
| Frame Rates(On Nvidia Jetson)* | RAW8: 5120×800@45fps, 5120×720@50fps, 2560×400@150fps RAW10: 5120×800@35fps, 5120×720@40fps |
| Image Sensor | Color Global Shutter OV9782 |
| Pixel Size | 3 μm x 3 μm |
| Active Array Size | 1280 x 800 |
| Optical Size | 1/4” |
| Focus Distance | 30cm-infinite |
| Camera Interface | 2-lane MIPI CSI-2 |
| Camera Board Size | 24mm x 25mm |
| Camarray Hat Size | 65mm x 55 mm |
| Default Lens Mount | M12 Mount |
| Distortion | <1% |
| Effective Focal Length | 2.8mm |
| Field of View(FOV) | 75° (H) x 47°(V) |
| IR Sensitivity | Integral IR-cut filter, visible light only |
| F.NO | 2.8 |
| Lens Dimension | Φ14×15.6mm |
| Lens Weight | 4g |
*: JetPack4.6/L4T32.6.1 on NVIDIA Jetson Nano/Xavier NX
Package Including
- 4 pcs 1MP OV9782 global shutter camera module with low distortion M12 lens
- 1 pcs Arducam Camarray quadrascopic stereo camera HAT
- 4 pcs 150mm/6inch 22pin to 22pin camera cables
- 1 pcs 300mm/12inch 15pin to 22pin camera cable
- 1 pcs 300mm/12inch 22pin to 22pin camera cable
- 1 pcs 73mm/2.87inch 15pin to 22pin camera cable
- 4 pcs M2.5*10mm Nylon Hex Standoffs
- 4 pcs M2.5 Nylon Nuts
- 4 pcs M2.5*6mm Nylon Screws
NOTES
-
- Raspberry Pi board is not included in the package.
- This bundle kit is not recommended for Raspberry Pi Zero.
- The OV9782 cameras in this kit are the special version and cannot be connected to Raspberry Pi directly.
Reviews
There are no reviews yet.