MT9J003 – 10.0 MP Camera Module w/ M12 Lens


3 in stock (can be backordered)


MT9J003 – 10.0 MP Camera Module w/ M12 Lens

The MT9J003 – 10.0 MP Camera Module w/ M12 Lens features the color version of Aptina’s breakthrough low-noise CMOS imaging technology, combined with the M12 LS-18023 lens. This sensor achieves near-CCD image quality (based on signal-to-noise ratio and low-light sensitivity) while maintaining the inherent size, cost, and integration advantages of CMOS. Also see MT9J001 – 10.0 MP Monochrome Camera Module for the monochrome version of this sensor. The standard lens mount for this module is the M12 mount. The key benefit of the standardized lens mount is the simplicity in swapping the lens – fisheye, wide-angle, telephoto, zoom, NoIR filter – all of which are available from DLSCorp. Note that this camera module can be special-ordered with either mount and any compatible lens – click on the Lenses category to see our complete selection.

Use this camera module on a Windows, Linux, or Raspberry Pi USB connection with the ArduCAM USB Camera Shield or the ArduCAM USB3.0 Camera Shield through its secondary interface (a 30-pin 0.5 mm pitch flat flexible cable interface), or your custom-built interface. ArduCAM supplies a wide variety of camera modules that are compatible with the USB Camera Shields, and all are available from DLSCorp.

  • 10.0 MP (3856 x 2764) MT9J003 CMOS color camera sensor
  • 1.67 µm x 1.67 µm pixel size, 6.440 mm x 4.616 mm sensor size
  • 1/2.3″ optical format
  • Includes LS-18023 lens (M12 mount, 1/1.8″ optical format, 4.2 mm focal length)
  • Rolling Shutter with Global Reset Release mode
  • Improved Low Light Performance – equivalent level to CCD sensor to support Digital Still Camera (DSC) applications.
  • Preprocessing Features – including resampling for subsampled video and 2-D defect correction (provides improved image quality)
  • Color (RGB) Bayer pattern
  • 7.5 fps at full resolution
  • 0.31 V/lux-sec responsivity using Aptina A-Pix technology
  • 65.2 dB dynamic range
  • Single 3.3 V power input
  • 30-pin FFC interface – includes 50 mm flex cable
  • 20 g / 40 mm x 40 mm x 31 mm
  • Digital video cameras (DVC)
  • Digital still cameras (DSC)
  • Industrial cameras
  • Medical cameras
  • Microscopy cameras
Package Includes:
  • ArduCAM CMOS MT9J003 1/2.3-Inch 10.0 MP Color Camera Module (qty 1)
  • LS-18023 lens with M12 mount (qty 1)
  • 50 mm Flex Cable (qty 1)

Additional information

Weight 0.85 oz
Dimensions 1.625 × 1.625 × 1.625 in


There are no reviews yet.

Be the first to review “MT9J003 – 10.0 MP Camera Module w/ M12 Lens”

Your email address will not be published. Required fields are marked *